When a drain keeps clogging no matter how many times you clear it, it is time to see what is really happening inside the pipe — and clean it the way a snake never can.
A standard drain snake punches a hole through a clog and lets water flow again — but it does not clean the walls of the pipe, which is why so many drains clog again within weeks. Hydro jetting uses a high-pressure stream of water to scour the entire interior of the pipe clean, removing grease, scale, sludge, and root intrusion in a single pass.
Camera inspection is the other half of the equation. By feeding a waterproof camera directly into your drain or sewer line, we can see exactly what is going on inside — whether it is grease buildup, tree roots, a sagging section of pipe, or a crack letting water in. That means we recommend the right fix the first time, instead of guessing.
Together, these two services are the most effective way to deal with a drain or sewer line that keeps clogging despite repeated cleanings. We use them on kitchen and bathroom drains, main sewer lines, and commercial drainage systems alike — and we will always show you what the camera sees before recommending any repair.
Snaking clears a path through a clog. Hydro jetting cleans the whole pipe. If a drain keeps coming back, this is usually the difference-maker.
Straightforward, no-surprise service from the first call to the final test.
Before we recommend anything, we feed a camera into the line to see exactly what is happening inside — no guesswork.
We walk you through the footage so you can see the blockage, buildup, or damage for yourself, in plain language.
Using high-pressure water, we scour the full interior of the pipe clean — not just punch a hole through the clog.
A follow-up camera check confirms the line is fully clear and gives you a clear picture of its condition going forward.
What York Region homeowners ask before booking a deeper drain cleaning.
A drain snake breaks through a clog and creates a path for water to flow — but it leaves residue on the pipe walls, which often causes the clog to return. Hydro jetting uses high-pressure water to clean the entire interior surface of the pipe, removing grease, scale, and roots far more thoroughly.
In most cases yes, but not always — which is exactly why we run a camera inspection first. If a pipe is already cracked or structurally weak, high pressure could make things worse, so we check the condition of the line before recommending jetting.
A camera inspection can catch problems early — like root intrusion, a section of pipe starting to sag, or scale buildup — before they turn into a full blockage. It is also a smart step before buying an older home, so you know the condition of the drain and sewer lines going in.
A typical camera inspection takes well under an hour. Hydro jetting timing depends on the length and condition of the line, but most residential jobs are completed in a single visit with a final camera pass to confirm the results.
A camera inspection and hydro jetting can show you — and fix — what is really going on inside the pipe. Let us get it sorted for good.